Minecraft Character Magnet with Changeable Clothes and Hair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print any colour you choose for any part. It is yours to choose and have fun! Or just glue together and put on fridge
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 60
- Makes
- 0
- Views
- 772
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a really fun Minecraft Character I built so that you can change its clothes to which ever colour you like. You can even print Multiple different colour clothes and swap them as you like. Clothes and Hair has magnet insets for 5mm Neodymium Magnets The body also has corresponding holes. Does not require glue for assembly but magnets need to be super-glued in place and allow a few hours to set before trying assembly or magnets will rip out and stick together.
To get the magnets the right way around I usually stick them together and mark the glue side of each pair with a texter.
If your magnets end up the wrong way the clothes will repel and you will end up with a Minecraft character that refuses to get dressed.
I have also allowed a 12mm main magnet hole in the body for helping it hang on the fridge as fully dressed it becomes heavy for standard magnets. So I recommend Neodymium N35 or higher which can be bought off Amazon or eBay.
I have included a suggested method for assembling the head. Eye Whites and Nose from the back of the head. Eye colours and mouth from the front.
I have reduced the size of the inserted items such as they grip and do not fall out but also do not require herculean strength to assemble. If you do not wish to have clothes interchangeable feel free to glue them on.
Hope this is fun for all ages, Except for youngsters that could eat or choke on small pieces. So play safe and look after each other.
***ADDED NEW Armour File. Needs supports of about 65 degrees. Just because I inset the front for a bordered appearance. Can try to print flat if you like But I have not tried it.
HAPPY PRINTING
Print Settings
0.2mm
10% Fill
No Supports or Raft
Eyes, Mouth and Nose I did solid but its your choice.