1 / 1
Tiny D1 mini case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case that a Wemos D1 mini will just fit into.
- Rating
- 4.5 / 5
- Likes
- 5
- Downloads
- 98
- Makes
- 3
- Views
- 813
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that a Wemos D1 mini will just fit into.
I use it together with the "Funkwecker" firmware, which allows me to remotely turn on/off or reset my PC. For this purpose I lead out thin cables on the side, which are connected to the power and reset button of the PC.
If your printer prints reasonably precisely, the cover should sit firmly in the housing without screws or glue and also hold the D1 mini well in position.
I made the area for the USB plug wide enough so that the plug should be able to be inserted completely without problems.