Pololu Gearmotor Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting bracket for Pololu gearmotors.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mounting bracket for these Pololu gearmotors.
The motors press fit into the bracket, and then the bracket press fits into 1/8" laser cut plywood for your project. From there, a zip tie ensures it isn't going anywhere.
It is important that the legs are shorter than the thickness of your material, else the zip tie won't secure the bracket. There is a second model with half-length legs for thinner materials.
The mounting holes for the legs are 6.35mm square, and sit 25.4mm apart. They should sit 1.6mm from the edge of your material.
Note:
Print chamfered-face down with supports for the legs