Fireplace Screen Holder (UPDATED)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple upper and lower latch to hold a fireplace screen from falling over. Removable lower portion.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATED 03/16/2024: The top screen catch would sometimes get pulled down and didn't do the best job with the style of screen that we have, so it was redesigned to be a two part assembly. Uses an M4 nut and M4 x 15mm screw to hold it all together. Held to the fireplace with 3M VHB tape.
My toddler liked to pull down the fireplace screen so I made an upper and lower catch to hold the screen in place. The lower holder has a removeable piece so the screen can be removed as-needed. #4-40 hardware was used to hold the lower portion together. The #4 nut drops into place and then a 1-½" screw holds it in place. The upper catch was positioned so it just holds the top stable. I used 3M VHB tape to hold everything in place. I printed them in PETG with 3 walls and 50% infill.