Coaster With Hexagonal Pattern & Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.48 – €1.80 net (excluding VAT)
For file: CE3PRO_coaster.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.64 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 2.05 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A coaster design with hexagonal pattern and a dispenser that holds up to 5 of them.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 157
- Makes
- 1
- Views
- 575
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As the title says, this is a coaster design with a hollowed out hexagonal pattern and a dispenser to hold up to 5 of them together.
The hexagonal pattern itself is not really my own original design, as I drew a lot of inspiration from google images. That said, the eraboration of the 3D model of the coaster and dispenser are original.
In the following image, I detailed the most important dimensions of the coaster:
I think they will be useful if you plan to make your own dispenser for this type of coaster.
For the same reason, I also attached the SOLIDWORKS 2020 .sldprt files for the coaster and the dispenser, so they can be modified at will.
Print Settings
Both models where printed in PLA and PETG, without supports or rafts, at 0.2 mm resolution and 100% infill for the coasters and 15% for the dispenser.
All the parts can be printed as they are, there is no need for supports or rafts.
Assembly
There is not really an assembly process to follow. If you have already printed the dispenser, you can stack your coasters (up to 5) in it, just like in the gif bellow:
