1 / 8
BLTouch & Tronxy AutoLevel Mount for V6 and Volcano — image 1
1 / 8

BLTouch & Tronxy AutoLevel Mount for V6 and Volcano

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

BLTouch and/or Tronxy AutoLevel Mount for V6 and Volcano.

Rating
0 / 5
Likes
2
Downloads
24
Makes
0
Views
407
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Tested with Volcano, BLTouch mount work.

Works with Tronxy_X5SA_Hemera_Mount_V2_withoute_levation.stl from https://www.printables.com/model/223396-tronxy-x5sa-hemera-mount/files

Not Tested, but should work:

-Volcano & Original Tronxy ABL

-V6 & Original Tronxy ABL

-V6 & BLTouch

BLTouch:

With V6 mount it like the first Picture

With Volcano mount it like the second Picture

BLTouch to Nozzle should be (X) (-)39mm and (Y) (+)3mm (measured after installing BLTouch V3.1)

Origian Tronxy AutoLevel to Nozzle should be (X) 39mm and (Y) 0mm

But make sure to check this!!!

Hemera V6/ Volcano Part Cooling Duct & Mount https://www.thingiverse.com/thing:4042492

  • Update (05.15.21)

ADD: ABL BLTouch V1.2 short reinforced (ABL BLTouch V1.2 Short breaks after first test)

  • Update (05.28.21)

BLTouch Mount (ABL BLTouch V1.2 short reinforced) tested with Volcano, doesn't mount as considered. Work with Volcano but not how it should (BLTouch mountet at the ABL BLTouch V1.2 short reinforced only with one screw) New design is being considered

ADD: ABL BLTouch V1.3 (ABL BLTouch V1.2 short reinforced, bltouch was moved a bit in the middle to mount the srews)

Changed: BLTouch to Nozzle, X change from 41.75 to 39.2

  • Update (05.30.21)

ADD: New BLTouch Design (ABL_BLTouch_V1.4.1 and ABL_BLTouch_V1.4.2)

Change: BLTouch X to Nozzle, X change from 39.2 to (-)39 | BLTouch Y to Nozzle, Y change from 0 to (+)3 |

Category: 3D Printer Parts

Tags