Silica gel (Desiccant) container with sliding lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mesh (sort of) 150x55x40 mm container with sliding lid
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 150
- Makes
- 0
- Views
- 1,492
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
There are tons of other designs out there but I create this as I thought it will be easier to print with the filament that I had and with the size that fit inside my dry box.
This is a container assembly (dove tails, push fit) of 6-parts with mesh (sort of) holes and a sliding lid.
The container size is 150x55x40 mm.
Every hole is 2mm in diameter so you can use smaller size silica gel / desiccant.
You will need to assemble and glue the parts (front, left, back, right and base) together.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 v2
Print bed adhesion:
Brim if you have trouble with print warping
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: Generic PLA + / PLA Pro
Notes:
0.4mm nozzle
Printed with CHEP's FF fast 0.28 profile
Custom Section
You may also visit these models if you are interested:
Option #1: Filament spool rod hanger
https://www.printables.com/model/222161-filament-rod-43mm-hanger
Optional #2: Heated filament dry box
https://www.printables.com/model/224463-heated-filament-dry-box
Optional #3: Filament feed tube merger 6mm
https://www.printables.com/model/222162-filament-feed-tube-merger-6mm