Silica gel (Desiccant) container with sliding lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mesh (sort of) 150x55x40 mm container with sliding lid
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
There are tons of other designs out there but I create this as I thought it will be easier to print with the filament that I had and with the size that fit inside my dry box.
This is a container assembly (dove tails, push fit) of 6-parts with mesh (sort of) holes and a sliding lid.
The container size is 150x55x40 mm.
Every hole is 2mm in diameter so you can use smaller size silica gel / desiccant.
You will need to assemble and glue the parts (front, left, back, right and base) together.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 v2
Print bed adhesion:
Brim if you have trouble with print warping
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: Generic PLA + / PLA Pro
Notes:
0.4mm nozzle
Printed with CHEP's FF fast 0.28 profile
Custom Section
You may also visit these models if you are interested:
Option #1: Filament spool rod hanger
https://www.printables.com/model/222161-filament-rod-43mm-hanger
Optional #2: Heated filament dry box
https://www.printables.com/model/224463-heated-filament-dry-box
Optional #3: Filament feed tube merger 6mm
https://www.printables.com/model/222162-filament-feed-tube-merger-6mm