US Coin Examiner-holder Slide for USB Microscope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The purpose of this contraption is for easy manipulation and moving around of a US Coin (Quarter, Dime, Nickel, and…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 85
- Makes
- 0
- Views
- 462
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
The purpose of this contraption is for easy manipulation and moving around of a US Coin (Quarter, Dime, Nickel, and Penny) under a USB microscope setup.
You can also view an edge of a coin by sticking the coin in the rectangular hole.
Again, this Coin Holder Examiner Slide is compatible with modern U.S. Coins which include: Quarters, Dimes, Nickels, and Pennies.
This isn't compatible with half dollars or dollar coins, or coins that are drastically out of spec.
Caution: It occurred to me that Polylactic Acid or PLA might damage the coin due to its acidity, Don't leave your coins on the holder for the long term. This utility is only to be used in a short time, a few minutes or maybe a few hours at most--just to make sure your precious coins will be safe and not damaged.
Note the associated License used on this file. Please don't sell these without my permission and please give credit to me if you decide to copy the idea or modify the file-to make it better.
If you particularly find this useful and are using it regularly, please consider sending me a tip, any amount is greatly appreciated.
Thank you for stopping by! :-)
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
30%
Filament: Esun PLA+ White
Notes:
It took about an hour to print, I printed a little bit slower than usual to make sure there was no over-printing and the print would not be out-of-spec.
Lookout for sharp edges that may stick out
Look out for sharp edges that may stick out on the print, you don't want to cut yourself.
Category: Hobby