Hexe Sound
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sound proofing hexagon shaped foam holders for room or office
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 60
- Makes
- 0
- Views
- 2,536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I designed these hexagon shaped reticulated foam holders to install in my room where I mostly do Video Conferencing, The holders are 4-¼' per side with 1-½" deep.
Overall measurements:
Widt 8-½"
Height 7-¼"
Depth 1-½"
There are two mounting holes on the back which allow you to configure 2 ways and they also have perforated base to reduce the amount of material used for printing as well as to catch rear reflections from the wall.
Included in the files are 2 types of spacers to allow for a gap between the wall and the panel. You can also mount flush to the wall but recommended to leave an air gap to improve results.
Spacers are ½" and 5/8"
Installation of these are up to users discretion and screws + anchors are recommended but optional. Double sided tape might also work.
Recommended settings and material are up to you but I used Prusa Slicer SUPERDRAFT settings and my infill was set to 15%. The lower the infill the less material, the less the weight on these.
I hope this is useful to you and feel free to leave some feedback