Divider for Sterilite 6qt bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits in the bottom of a 6qt Sterilite container to divide the space in half
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 281
- Makes
- 0
- Views
- 1,680
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Drops into a Sterilite 6qt bin to divide the bottom in half if you need more granular storage.
I printed with no top or bottom layers to get only infill which dramatically reduced the print time.
Three versions available:
- sized to slice on PrusaSlicer for the MK3* at 0.3mm layer height, the wall thickness of 1.1mm results in two shells for quick printing.
- sized to slice on PrusaSlicer for the MK3* at 0.2mm layer height with a thinner wall of 0.86mm. Would be lighter but slower to print due to the smaller layer height, don't know why you'd want this choice.
- sized to slice on Cura or similar that sets extrusion thickness to 0.4mm
Another option if you don't need it strong, or have a larger diameter nozzle - you can print any one of the three in vase mode. (PrusaSlicer: Print Settings tab, Spiral Vase under “Vertical Shells”, Bambu Studio or OrcaSlicer: “Spiral vase” under Others, Special Mode. Been a long time since I've used Cura so don't remember where that's set) One issue I've had with this approach is I haven't been able to figure out how to do only infill (not solid layers) on the bottom to save time.
I only use the first model but provided the other two if it might be useful to someone.