1 / 2
Gameboy Zero XY Button Wells
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Button Wells with drill hole guide for Gameboy Zero project.
Instructions:
- Super glue in position the button wells by resting against existing A-B button wells.
- Drill pilot hole (3mm) using guide from reverse side.
- Recommend to use stepped drill bit and drill 11mm hole from the front side.
NOTE: Do not drill full size hole 11mm from the reverse side as it can cause the button wells to crack.
UPDATED: REV 1: Reduce height of wells 5mm->4mm and pin from 8mm->5.5mm.
Pin interferes with PCB
Print Settings
Printer:
Wombot Exilis XL
Rafts:
No
Supports:
No
Resolution:
0.1
Infill:
100%
Category: 3D Printing