Nozzle Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Storage box for 3d printing nozzles of different thread sizes and room for PTFE Tubes
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 53
- Makes
- 0
- Views
- 649
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a storage box for 3d printing nozzles. In the “nozzlebox main part 2” there is room for 6 mm and 7 mm thread diameter nozzles. The “part 1” has only holes for 6 mm thread nozzles. In both Versions there is room for short PTFE Tubes for hotends.
The main part and the lid can be assembled with a 1,4 mm wire. A printed hinge didn't work with the Extrudr Biofusion I used due to high brittleness.
Contrary to my published gcode I recommend printing the two parts separately to avoid stringing between the parts.
Printing recommendations:
- infill: 15 % linear
- shells: 3
- supports: only on the inside of the lid and below the hinge pickup point on the main part
- recommended material: Biofusion or PLA