Nozzle Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Storage box for 3d printing nozzles of different thread sizes and room for PTFE Tubes
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 649
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a storage box for 3d printing nozzles. In the “nozzlebox main part 2” there is room for 6 mm and 7 mm thread diameter nozzles. The “part 1” has only holes for 6 mm thread nozzles. In both Versions there is room for short PTFE Tubes for hotends.
The main part and the lid can be assembled with a 1,4 mm wire. A printed hinge didn't work with the Extrudr Biofusion I used due to high brittleness.
Contrary to my published gcode I recommend printing the two parts separately to avoid stringing between the parts.
Printing recommendations:
- infill: 15 % linear
- shells: 3
- supports: only on the inside of the lid and below the hinge pickup point on the main part
- recommended material: Biofusion or PLA