U6 Mesh and U7 Mesh Mount with Cable Management
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another Ubiquiti access point mount. Other than the original part, it allows the cable to run through the pole.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 197
- Makes
- 0
- Views
- 3,616
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
This mount is designed for a Unifi U6 Mesh or U7 Mesh installation on a pole. Other than the original parts, the Ethernet cable is not exposed to the environment. Instead, the mount allows the cable to run directly into the pole. To complete a full cable management, the bottom part allows the cable to run down or directly into the wall.
In addition to the Mid*.stl and Bottom*.stl wall mounts, this model provides a general purpose plain alternative. Mid and Bottom options come with 2 parts each: they can be attached with other stuff blocking the pole already.
The pole's diameter is 20mm. The inner diameter will be 18mm typically. Even bulky RJ45 plugs with go easily through this diameter.
Printing
Good with standard settings 0.2mm layer height and 0.4mm nozzle. For outdoor use, PETG is recommended. The U7 Mount part requires some support in the bottom, I used organic from build plate. BottomBackLeft.stl works nicely with organic support from build plate. Other parts are printed without support.
Additional parts required
8 x screws for the wall mount
1-2 screws provided as part of the original mount
20mm aluminium pole (we use it with a 2 meters length)