F-1 Engine
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.81 – €0.99 net (excluding VAT)
For file: F-1_Outrigger_0.15mm_PLA_MK3S_1h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.90 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 1.34 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
3D model of the F-1 Engine from the Saturn V rocket
- Rating
- 5 / 5
- Likes
- 384
- Downloads
- 2,465
- Makes
- 26
- Views
- 11,038
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial
3D model of the F-1 Engine from the Saturn V rocket designed for 3D printing. Model can be assembled with standard super glue.
Default Dimensions (L x W x H):
- 1:33 scale: 4.25 x 4.25 x 6.75 in (110 x 110 x 172 mm)
Check out my other rocket engine models at In3DSpace.com
Print instructions
Assembly Instructions: bit.ly/f-1-assembly (Also in Files tab)
Recommended Print Settings:
F-1 Nozzle:
- Nozzle Diameter: 0.4mm
- Layer Height: 0.2mm
- Infill: 15%
- No supports required
F-1 Powerpack:
If the STL is too large for your print bed, it can be split into individual pieces using PrusaSlicer or Meshmixer
- Nozzle Diameter: 0.4mm
- Layer Height: 0.15mm
- Infill: 15%
- Supports only required for oxidizer dome piece (see picture)
F-1 Outrigger:
Can be a difficult piece to print. If having issues, try printing slower.
- Nozzle Diameter: 0.4mm
- Layer Height: 0.15mm
- Infill: 15%
- Perimeters: 3
- Brim required: recommend 8mm so they form a single piece, helps with removal from bed
- No supports required
- Print Speed: 50%