Fan 120 voronoi grid without flow reduction
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.93 – €1.14 net (excluding VAT)
For file: fan 120V_0.2mm_PLA_MK3S_1h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.03 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is another 120mm fan guard. where the most important thing is not to reduce the flow.
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 278
- Makes
- 2
- Views
- 755
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is another 120mm fan guard. where the most important thing is not to reduce the flow, after downloading and printing several models, which protect very well, the perimeter of the protection is covered, which is where the propeller needs air. This model does not protect as much but maintains a higher flow rate.
This model uses little material and has spacers for air intake around the perimeter, printed in 0.2 obviously without supports.