Clamping Knobs for T-Track
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recently, I made a drill press table with fence, router table with fence and bench clamps and needed some knobs to…
- Rating
- 5 / 5
- Likes
- 33
- Downloads
- 115
- Makes
- 1
- Views
- 887
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Recently, I made a drill press table with fence, router table with fence and bench clamps and needed some knobs to secure the fences and clamps using installed T-track.
So, I whipped up these two versions using Fusion 360 with the following design parameters:
- Had to work with 1/4" 75mm long bolts with square nuts that I already had laying around.
- Had to have a diameter no wider than than the drill press fence which was two 3/4" plywood boards sandwiched together at least for the smaller version (3/4" = 19mm).
I hope you find these useful.
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
50%
Filament: eSun PLA+ 1.75mm Black
Notes:
I printed mine without supports which resulted in some cleanup afterwards but nothing that caused any issues.
Using Fusion 360
Category: Tools