External Exhaust Fan Shroud 60x25x80mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My display console is filled with many spinning NAS hard disks and network equipments. It was getting too warm that it..
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
My display console is filled with many spinning NAS hard disks and network equipments. It was getting too warm that it deformed a 5v 80x10mm slim fan placed inside the console to exhaust the heat.
So I created an external exhaust fan shroud 80x25mm for a smaller but more rigid 5v 60x25mm fan. This allows the fan not to be totally exposed to the internal heat and yet able to exhaust the heat sufficiently. Recommend to be printed in PET-G for slightly higher glass transition temperature compared to PLA.