1 / 2
External Exhaust Fan Shroud 60x25x80mm — zdjęcie 1
1 / 2

External Exhaust Fan Shroud 60x25x80mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My display console is filled with many spinning NAS hard disks and network equipments. It was getting too warm that it..

Ocena
0 / 5
Polubienia
1
Pobrania
14
Wydruki
0
Wyświetlenia
239
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

My display console is filled with many spinning NAS hard disks and network equipments. It was getting too warm that it deformed a 5v 80x10mm slim fan placed inside the console to exhaust the heat.

So I created an external exhaust fan shroud 80x25mm for a smaller but more rigid 5v 60x25mm fan. This allows the fan not to be totally exposed to the internal heat and yet able to exhaust the heat sufficiently. Recommend to be printed in PET-G for slightly higher glass transition temperature compared to PLA.

Tagi