Rotary Toothbrush powerbrush
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.80 – €0.97 net (excluding VAT)
For file: 072P. Rotary Toothbrush v2_0.2mm_PLA_MINI_1h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 8 g
- Print time reported by the author
- 1.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hexhead attachment for drill or driver for cleaning using old toothbrush heads.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 28
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Rotary brush attachment for drill or impact driver.
Printed in PLA.
Sliced with infill settings : 70% hex end / 50% mounting plate.
- Print attachment.
- Find 4 old toothbrushes of similar size.
- Carefully cut the brush heads off.
(I used a box cutter - but needed a lot of force). - Superglue the heads to the flat planes.
(can be secured with rubber bands while glue sets) - Wait 24hr
- Remove bands, install in drill and enjoy.
PS. If you make it and enjoy it, please post a make.