1 / 3
Extendable fly swatter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength. If the threads don't want to move freely you could what's over your e-steps. Initial layer settings must be the same as other layers to prevent elephant foot. The flap needs support and handle use only supports for buildplate. The inside support is already added.
You can watch how to assembly it at: