Sawzall / reciprocating saw long handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Recommended printing with: -PETG -High amount of perimeters(it matters a lot more than infill ratio) -No cooling
- Rating
- 0 / 5
- Likes
- 61
- Downloads
- 294
- Makes
- 0
- Views
- 2,279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is two handed saw handle. As far as i know this is the only one that is long enought to comfortably use it with both hands.
I recommend using old broken drill bit as a pin for the blade. It is really hard to find 3,5mm screw, and using screw of wrong size will add addicional strain on the plastic.
The screws at the bottom and the top of the blade are needed to spread the strain and give more life to this handle.
Needed parts:
3x – m4x20mm screw (8mm wide head)
2x – m4x30mm screw
1x – 3,5x26mm steel pin