1 / 3
Lathe Outboard Spindle Spider
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lathe spindle spider to hold work on the outboard end of the spindle.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 61
- Makes
- 0
- Views
- 733
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a lathe spindle spider to hold long pieces of work on the outboard end of the spindle. Threads onto a 34mm x 1.5 spindle. You will need (4) 8mm x 1.25 bolts and nuts. The spindle spider is threaded for the 34mm x 1.5 but only has (4) 6.5 holes for the 8mm bolts. You will need to drill holes to 6.8mm and tap. Note: Area 5mm around the (4) holes is a solid infill to allow for the drilling and taping.
Printer: MK3s, Filament: Inland PETG Red.