P
Printables
Funny sign - Have you tried turning it off and on again?
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
Search results: turning
Counting matching models…
P
Printables
Funny sign - Have you tried turning it off and on again? (V2)
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
P
Printables
Dust Collector 100mm eg for woodturning lathes
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
P
Printables
Catch the bees game turning surface magnet stick
Description CATCH THE BEES & AVOID THE WASP This can be a game for 3 people or it can simply be a toy for kid or for an adult (it's for everyone). This design also is with turning mechanism. Both middle and honeypots with bees are…
P
Printables
Brio 180 Degrees Turning Shorter - RMX
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
P
Printables
SOVOL SV08 DRAG CHAIN 120° TURNING TOWER CONNECTOR
Welcome to the turning drag chain gantry connection tower. It is the best way to give the cable freedom in turning by a moving toolhead. So check out the pictures and if you like it → build it!
P
Printables
Parts to assist in building a 10m "Wonderbar" antenna - a compact dipole with a turning radius of 4 ft!
Plans for the antenna can be found here: https://www.hamuniverse.com/wonderbar.html I used #14 insulated common household wiring for the coil and #16 hook-up wire for the "bowtie" part and the 2-turn coupling loop. The bowtie shape I made…
P
Printables
Aquapurr 4 Cat fountain turning shower mount
Background I loved the idea of the aquapurr cat fountain as you do not have to clean it and the water never runs out and is always fresh. But it was a bit of a journey to get my cats to use it so I wanted to share the solution that…
P
Printables
Nock Turning & Installation Tool
Easy way to align your nocks to the right position for maximum accuracy. If you hit your own arrows as a consequence, you also might need a suiting nock extractor at some point. Also check out the Ultimate Archery Companion . Printing is…
P
Printables
D shaft turning knob
a basic knob replacement for appliances that have a D-shaft to rotate between different modes recommended 100% infill and to be printed sideways with all the lines being arranged lengthwise
P
Printables
Pod for a two inch hole to hold woodturning chisels
This item is for drilling a 2 inch hole into a board and holding multiple size chisels for woodturning enthusiasts.
P
Printables
Protectors for Coronet Hawk 1 1/4" and 5/8" Spur/Drive Centers for woodturning lathes
Protectors for selected spur drives as used woodturning lathes A good spur drive is sharp. It may cut your hand when 'popped' into the taper. Then you kick it out of the taper, it may cut your hand or get damaged when it falls on the…
P
Printables
Turning Lid Canister
A small turning lid canister to store small parts, pills and viscous materials.
P
Printables
Turning Magna Tiles into Tabletop Terrain
Inspired by mark dickey and Mad dok minis on youtube i got inspired by their concept to create my own simple kitbash models! Subscribe! click my Logo in the video! Use your own infill to personalize your favorite patterns! There is a…
P
Printables
Ultimaker 2 Upgraded Knob (for better grip and speed turning)
The same as the Original knob except with a dowel sticking out the end like that of a CNC machine for quicker turning
P
Printables
Accessoires 3D Scan Turning Table
accessories for the great 3D Scan Turning Table from Rogue_72 https://www.printables.com/model/891282-3d-scan-turning-table Thank you very much for this at this point! .)Crank knob with M4 Heat Set insert or optionally with printed thread…
P
Printables
Employees Must Stop Crying Before Returning to Work, signage
Employees Must Stop Crying Before Returning to Work, signage Category: Signs & Logos
P
Printables
Woodturning Bowl 01
Some time ago I watched some wood-turning videos on YouTube - simply because I enjoy it. Today I was wondering if I could do something like this in Fusion for 3D printing. It's surprisingly simple and a nice visual and interactive…
P
Printables
turning knob for m5 hex head- 15mm
Small turning knob for M5 hex head screws or M5 nut. Insert the hex head or the nut and secure it with the small counterpart, so it wont fall out of the knob. The turning knob allows you to easily screw everything tight without using any…
P
Printables
turning knob for m5 hex head - 12mm
Small turning knob for M5 hex head screws or M5 nut. Insert the hex head or the nut and secure it with the small counterpart, so it wont fall out of the knob. The turning knob allows you to easily screw everything tight without using any…
P
Printables
upscaled turning tool / insert holder with insert
This is a model of an insert holder with insert, screw and a torx key. Back then when i designed it (like 5 years ago) i took some liberty and didnt hold 100% to the norm but it is something like a “DIN 4968 VDUH 48 14 45 F”. Why I did…
P
Printables
Woodturning Bowl 02
Inspired by woodworking techniques I tried a variation of a simple stacking pattern. If you like this one, you might want to check this too: Everything is based on this simple pattern: If you like this little thing, you might want to…
P
Printables
Turning Red Redpanda Fanart Figure Decor
I love this movie so much! So i made a cute little figure ^^
P
Printables
Teigblume / Turning Tool for Thermomix (by McBohl)
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
P
Printables
Woodturning Bowl 03
This is inspired by woodturning techniques and a variation of this little thing: https://www.prusaprinters.org/prints/103978-woodturning-bowl-02 If you like this little thing, you might want to check those ones, too:…
P
Printables
Woodturning Vase 01
Still playing with woodturning techniques. Same pattern as for the https://www.prusaprinters.org/prints/102766-woodturning-bowl-01 , but a different result based on the different shape. If you like this little thing, you might want to…
P
Printables
Vice Turning Rod
Print with 80% infill, and use a 7mm brim. Lay the rod down on the build plate. You also need supports for the under side of the rod; normal supports were used. Lastly, I would use petg or abs/asa for the material. If you have questions…
P
Printables
Turning Table / Caroussel Ø 15 cm with bearing balls
Put anything on it you want to turn around. Printing I printed with PLA+, layer height 0.2 mm, on a smooth build plate. Assembly Place the Separator on top of the Base Plate. Place eight bearing balls in the groove of the Base Plate .,…
P
Printables
Woodturning Vase 02
Still playing with woodturning patterns. This is a 3 tone pattern but it works in to colors too. If you like this little thing, you might want to check this too: https://www.prusaprinters.org/social/3373-wilko/collections/36089 BTW: if…
P
Printables
Woodturning Vase 03
Another little thing inspired by woodturning. This is a 3 color pattern. If you like this little thing, you might want to check this too: https://www.prusaprinters.org/social/3373-wilko/collections/36089 Print Settings Supports: No…
P
Printables
This is a tap clamp to stop small children turning on bath taps and scalding themselves etc
My grandson who has autism liked to play with the bath taps. This was potentially worrying so I made a clamp to prevent them from being turned on. Its only natural for children to experiment but the danger is scalding or flooding. It…
P
Printables
Woodturning Bowl 04
Still playing with woodturning patterns. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and than patterned along the dotted lines. If you like…
P
Printables
Funny sign - Have you tried turning it off and on again?
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
P
Printables
Funny sign - Have you tried turning it off and on again? (V2)
Ensure you add a pause in the G-code at the right layer! Ensure you add a pause in the G-code at the layer you intend to switch the filament to another color.
P
Printables
Woodturning Bowl 05
Variation of Woodturning Bowl 04. The shape is more roundish but will need support for printing. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single…
P
Printables
Woodturning - SuperNova Chuck Jaws
Use this at your own risk and caution! I needed some specialty jaws for holding a finished workpiece without damaging the surface. For this, I designed these special jaws to an exact fit. These jaws fit on the Teknatool SuperNova Series…
P
Printables
Woodturning Vase 04
Still playing with woodturning patterns. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this too:…
P
Printables
Turning decorative table
Ideal accessory for painting and decorating ceramics or other things. It can also be used for scanning and photographing small objects, thanks to the swivel base. Printed with ASA Layer height 0,2mm 3 perimeters Minimum 20% fill rate I…
P
Printables
Heewing T2 Turning Tail Wheel
Turnable tail wheel for Heewing T2. The original landinggear is good but I missed a turnable tail wheel as well as a better way to quickly attach and detach the landinggear. Also mount knobs for quick assembly of landing gear without…
P
Printables
Universal fingernail grinding jig for woodturning gouges
You can use the jig like you would a Oneway Vari-grind jig, or use it with a holder for bar guided systems like the Sorby ProEdge or Tormek and similar wet sharpeners. UPDATE : The main part of the jig now comes in 3 sizes : 16mm and 19mm…
P
Printables
Woodturning Vase 05
Same base pattern as the vase before, just changed some dimensions and the shape of the vase. I like the left one a bit more but you'll need support to print this. The right one is optimized for printing without support. This might be a…
P
Printables
Woodturning Bowl 06 (Sleeper Bowl)
Another variation of the Woodturning Bowl 04. You might call this one the sleeper bowl. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into single colors and…
P
Printables
Woodturning Bowl 07
This is the bowl version of Woodturning Vase 05 and I think it really works great as a bowl. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing, you might want to check this…
P
Printables
Woodturning Basket 01
What's the difference between a basket and a bowl? Perhaps just some holes ;-) This is a variation of Woodturning Bowl 07. This might be a very challenging one in real live, okay in CAD and fine 3d printed. If you like this little thing,…
P
Printables
Smooth turning spool holder
This is a remix whereby the mount is changed to that popular mount (here: https://www.thingiverse.com/thing:3020026 ). NOTE: This is a remix from https://www.thingiverse.com/thing:4649148 (edit tool does not let me attribute correctly!)…
P
Printables
Wood Lathe - Sphere Turning Attachment
The cutter is placed on the 20mm rail guide. With the positioning out of the middle axis it is possible to cut conkave and even flatter convex curves. Maybe useful for hollowing spheres, too. This jig can also used to position stamps and…
P
Printables
Centering and Off-Center Jigs for Eccentric Wood Lathe Turning
Use the jigs to mount wood blanks in a lathe chuck. One jig centers the blank, the other jigs allow for off-center turning. The blanks should be 1.5" to 1.6" diameter made with a 1.75" hole saw, and are used to create wooden pendants.
P
Printables
XRP Zero-Point Turning Radius Chassis
This chassis was designed by Cornell University students with the following features: Zero-point turning radius Caster/omni-wheel dual mount Half-hex rails optimized for 3D printing and future-proof for a potential injection molded…
P
Printables
Woodturning Vase 06
Ready for some 70s vibes? I like the left vase a little better, the right one can be printed without support structures. Category: Decor
P
Printables
Woodturning Vase 07
Based on the Woodturning Bowl 05 I've created these vases. You might also call them "The Bomb" or "Mind bender" ;-) The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are…
P
Printables
Woodturning Vase 08
This is based on the internals of Woodturning Vase 07 and prints completely without support structures. The base pattern is a simple hexagon where every 2nd corner is connected to the center. The resulting profiles are extruded into…
P
Printables
180deg turning robot car
Take a look at this awesome 3d printable robot car chassis featuring 4 turning wheels and it can even ride sideways !! You can also find only the 180 deg steering part if you want to use just that on your own chassis. You can find a…
P
Printables
Motorized Rotating Display. Turning base on microwave motor
Attention! This artifact works with potential harmful electric current. Be careful. A 10cm diameter turning base on a microwave motor.
P
Printables
Turning heart
A special gift for your loved one: A single-piece 3D rotating heart! This design is crafted to be produced seamlessly a
P
Printables
Woodturning Bowl 09
You want straight walls and the beautiful cube pattern? Turn the axis of rotation by 90° and you're good to go. But you will lose the pattern on the bottom of the vase. Or is it a bowl or a trash can? The base pattern is a simple hexagon…
P
Printables
Turning handle with rotating swivel knob for 9mm D shaft
I created this Model to replace the missing handle to set the thickness on a TT204 jointer/planer/thicknesser. The handle fits snug but is still easy removable on the 9 mm D shaft (7.9 mm from the flat of the D to opposite round edge of…
P
Printables
Nespresso capsule turning holder
I am using 4 small bearings 5x16x5mm ( 625RS ) : https://www.laskakit.cz/625rs--kulickove-lozisko/ !!!! If you want to put tubes of capsules there correctly you have to tear off the “lid” of capsule tube (it left box with “diagonal end”).…
P
Printables
Britax Römer Smile 3 Turning wheel repair kit
My Britax Römer Smile 3 front wheel locking and turning mechanism broke so I took it apart and modelled the parts to be 3d printed. You can use all the original screws and spring when reassembling. After replacing the parts the wheel…
P
Printables
Turning Base (V1)
This is a turning I designed for a solar tracker school project. It makes use of a stepper motor and can be used for multiple purposes if you have anything you want to display. Have fun
P
Printables
REUSABLE MOLD FOR PEN TURNING BLANKS (120*20*24mm)
Since i have a new lathe i try to create also pens. I found this https://cults3d.com/en/3d-model/various/reusable-mold-for-pen-turning-blanks-makerneer model online. This is a good model, but it was too big for me so i designed a smaller…
P
Printables
Mustang GT350 Underbody Turning Vanes
This is design was inspired by Verus Engineering's “ Turning Vane Kit - Ford Mustang Shelby GT350” which must be used with their “ Flat Underbody Panel Kit - Ford Mustang Shelby GT350” and “ Fender Evacuation Kit - Ford Mustang Shelby…
P
Printables
Wabeco Drill Press - Woodturning Reduction Sleeve for MT2 Tailstock
https://de.aliexpress.com/item/1005005986808041.html?pdp_ext_f=%7B%22sku_id%22%3A%2212000035425740359%22%7D&sourceType=1&spm=a2g0o.wish-manage-home.0.0&gatewayAdapt=glo2deu https://ae01.alicdn.com/kf/Sc00305d77c644a04a9fcfdb391b70b57g.jpg…
P
Printables
Turning Base V2
An improvement to the turning base v1 made before. It includes extra space for components and herringbone gear system
P
Printables
A tool for turning the film sensitivity change ring for the Konica C35AF
A tool for turning the film sensitivity change ring for the Konica C35AF. You can easily change the film sensitivity even if the ring is stuck.
P
Printables
Turning knob for Target Brownie 616 box camera
The turning knob on my Target Brownie 616 camera had become too smooth to get a good grip, so I quickly drew this model in Tinkercad to fit over the existing knob, and added two little nibs to add a bit more leverage. This fits very…
P
Printables
TTS-100 Turning Tool Setter for SVD-186R
https://tormek.com/en/products/accessories/tts-100-turning-tool-setter Use setter for distance of tool bar and protrusion of tool from model. I use with: https://www.printables.com/model/1329063-svd-186r-tormek-sharpening-guide
P
Printables
Turning Knob M6 Insert
knob with cutouts for added grip, using an M6 insert for securing a bolt in place. printed using Generic Grey ABS, 40% grid fill, 4 walls. i found that the added weight from the infill and extra walls helped it feel more like the original…
P
Printables
Dust Collector 100mm eg for woodturning lathes
I designed a dust extractor for my lathe, which attaches to the hand rest via a rod. This allows the dust to be extracted precisely where it is generated during sanding. The connection fits standard 100mm dust extraction hoses. I printed…
P
Printables
Rubber attachment for live centres (Woodturning balls)
I designed two different attachments for the live center for turning balls. The attachment simply attaches to the standard 60° center to clamp the workpiece without damaging it. Printed from TPU with 20% infill. Update: Added Modell…
P
Printables
VW T40058 Crankshaft Turning Socket Tool
Camshaft Key Assembly Crankshaft Pulley Tool I suggest ABS and 100% infill to make it strong.
P
Printables
Employees must stop crying before returning to work Sign
Funny Sign for bathroom of small business. Printed with two PLA Filaments. Color change at Layer change can be performed with almost any printer.
P
Printables
Turning ring for Print-in-Place Twisty Puzzle Box
V1 is for the basic version of core without fingernail grooves - needs to be glued in place V2 is for the core with fingernail grooves (from difficult version) - tight version should fit without requiring glue, loose version needs to be…
P
Printables
Finishing Bushings for pen turning
I got tired of spending so much money on those nylon finishing bushings, so I made my own. I printed these at 100% infil in PETG no supports with the large base on the print bed.
P
Printables
Wood Turning Rest for Taig Lathe
This is a wood turning rest I made as a quick fix to turn wood on the lathe. I turned a brass rod to 12.35mm (that's just what I randomly turned it to, that's not anything I did with a purpose). I used an M4 screw to hold it down, and…
P
Printables
Redcat Everest 10 and gen 7 Steering link for sharper turning
this is a link that doesn't hit the diff cover nearly as much! Have fun!! credit to Rob Beast for the make photo MRC Please show a make of it!!
P
Printables
Catch the bees game turning surface magnet stick
Description CATCH THE BEES & AVOID THE WASP This can be a game for 3 people or it can simply be a toy for kid or for an adult (it's for everyone). This design also is with turning mechanism. Both middle and honeypots with bees are…
P
Printables
Filler ring for M33 woodturning lathe tools with insufficient depth of report.
To fit properly on an M33 pickup of a woodturning lathe the tool should leave sufficient depth for the 9 mm deep 34 mm diameter report. This condition is not always fulfilled, in particular on tools sold via AliExpress, like this one , in…
P
Printables
Woodturning Chisel, Gouge & Tool Edge Protector
Updated 30Apr23 - See below… This is a variety of push-on protectors for woodturning chisels. If, like me, you tote your woodturning tools to various venues in a toolbox, where they can rattle around and crash into each other and the end…
P
Printables
Wood Ring Turning Tool
in a few days, I will upload the video for this project. This Is a tool designed to help you turn wooden rings on a commonly sold mini-lathe. be careful not to overtighten the chuck otherwise, your ring will be likely to break as you turn…
P
Printables
Pottery Turning Tools
These turning tools were designed to use at a potter's wheel for forming and trimming purposes. 100% infill is recommended. Print with the handle flat against the print bed and tip pointing up.
P
Printables
Guitar turning peg
A have an old guitar and the turning peg was damaged. There is no any option to buy it, so I did it
P
Printables
My Customized Sweeping 2-line name plate (Have You Tried Turning if Off and On Again)
Customized version of https://www.thingiverse.com/thing:3045130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3045130 Instructions Using the following options: faces_segment = 10 textstring1 = Have You…
P
Printables
Beyblade X three sides ratchet turning tool
His palms are sweaty, knees weak, arms are heavy There's vomit on his sweater already, mom's spaghettiHis palms are sweaty, knees weak, arms are heavy There's vomit on his sweater already, mom's spaghetti My sweaty hands wouldn't let me…
P
Printables
Turning Point USA logo
Copy of the Turning Point USA logo. 3 mm tall. change colors as described below : 0-1 mm white 1.2-2 mm red 2.2-3mm blue Click/copy and paste this link below to donate to their organization…
P
Printables
Mei Lee from Turning Red
Meilin Lee is the protagonist of the Turning Red movie, an adorable Chinese-Canadian teenage girl that has the fantastic ability to transform into a Red Panda =) No more spoilers! My daughter is a big fan of this movie, and she looks a…
P
Printables
Turning Point USA Keychain
Turning Point USA Keychain. LAYER HEIGHT .14 PAUSE LAYER 22 CHANGE TO RED. PAUSE LAYER 30 CHANGE TO BLUE.
P
Printables
Turning Point USA
Turning Point USA (TPUSA) is an American nonprofit organization that advocates for conservative politics on high school, college, and university campuses
P
Printables
Woodturning - Rotary Bowl Sander Marius Hornberger style - M10 Version
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
P
Printables
Lathe Turning Tools Holder for Peg Boards
Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…
P
Printables
Brio 180 Degrees Turning Shorter - RMX
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
P
Printables
Sanwa Restrictor Gate Turning Tool
Taking off the restricor plate on Sanwa joysticks to turn the gate from 8-way to 4-way is the biggest pain. Wanted a tool to quicky turn the gate without taking the plate off and came up with this. May need to pull joystick a little from…
P
Printables
Willy Jeep with turning wheels and suspension. DIY
You might need superglue or other strong glue that works on your filament type.
P
Printables
Bowl turning wedgie templates
A set of templates to set up your wedgie sled for cutting segments when doing open or closed segmented bowls. 12 segments - open @ 12°, closed @ 15° 18 segments - open @ 7°, closed @ 10° 24 segments - open @ 6°, closed @ 7.5° They are in…
P
Printables
Jaws for 2 axis woodturning (3cm, 4cm and 5cm diameter)
I try to make little wooden spoons You first have to turn something akin to a babies rattle and then mount that ball on a different axis . I found Alan Strattons design (…
P
Printables
Door Knob Safety Cover – Stops Turning Defiant knobs
This is a simple, strong, and easy-to-print door knob safety cover that prevents the knob from fully rotating. Perfect for keeping kids from opening doors, preventing pets from accidentally turning knobs, or stopping doors you want kept…