1 / 8
Light Modifier - Honeycomb Grid for ULANZI VL49 and Neewer RGB61
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Honeycomb Grid fits the ULANZI VL49 and Neewer RGB61 RGB Video Lights.
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 233
- Makes
- 2
- Views
- 1,769
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
A grid or honeycomb can be fitted over a light source to help control the spill of the light it produces. They look like bees' honeycomb (hence being known as honeycomb grids) and are great for helping to make a beam of light that is soft but focused.
Light Modifier - Fits the Neewer RGB61 and ULANZI VL49 RGB Photo/Video Lights.
PRINT INSTRUCTIONS:
- Print with supports for the entire bottom build plate.
- Must Use A PrusaSlicer Modifier. (Included Photos shows PrusaSlicer settings). Pay close attention to the modifier box and its position in my photo.
- Right click model name in right settings pane (Refer to Photo).
- Select Add Modifier
- Choose Box
- Size and place box through the center of the model (Refer to Photo).
- Right Click the box you created and select
- Density: 13%
- Pattern: Honeycomb
- Right Click the box you created and select Layers and Perimeters.
- Bottom Layers: 0
- Top Layers: 0
- Rotate model to 45 degrees.
- Print with supports for the entire bottom (cut out, inside lip and bottom center).
- Slice and check to be sure you can see through your Honeycomb Grid down to supports.