Cool Coaster
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.84 – €1.02 net (excluding VAT)
For file: InnerCower_1h0m_0.20mm_205C_PLA_ENDER3BLTOUCH.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Keep your summerdrink cold at all times.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 79
- Makes
- 0
- Views
- 677
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Preferably print with PETG as it is more water resistant.
Put the InnerCower in place before pouring on the ice, as it is easier to get the ice correctly placed. Once the ice is placed, remove the InnerCower and put on the TopCower.
Preferably put crushed ice inside and put it in the freezer until you need it. If you pour water inside to freeze it, it may crack.
Use 2 magnets to hold the InnerBox in place and so it does not float up when the ice melts. See the picture.
You can also add a little salt to the ice to get an extra low temperature. Do not put on salt until you are ready to use it, as otherwise it will have no effect.
With the InnerCower in place, you are ready to pour in ice:
