JBL Charger 3 wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wall mount for the JBL Charger 3.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 232
- Makes
- 2
- Views
- 1,062
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
This model allows you to mount the JBL Charger 3 directly to the wall. It was designed so that the buttons can be operated from the front and the flap on the back is freely accessible.
Only the holes on the bottom must be printed by means of a support. The overhangs are very small and do not need a support.
I recommend printing the arms at the transition point to the base body with a higher infill. In my GCODE the model is with 20% and the transition with 60% infill.
UPDATE
I had a mistake in my model. The screw holes for the wall mount are not correctly. I adjusted the model and reuploaded it.
I'm very sorry and disappointed about it. Now the problem is fixed.