TG100 Collet Extractor for Milling Machine Tool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for squeezing TG100 collets to make extraction possible
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Background
Unlike most ER collet nuts, which have an eccentric ring at the top of the threads, the TG collet nuts I have for my 40 taper tool holders do not have eccentric rings. The only way to remove TG100 collets from the nut for my tool holder is with this collet extractor.
Description
This collet extractor was inspired by a discontinued Lyndex TG100 collet extractor. An interior, revolved taper applies equal pressure to all sides of the collet when the extractor is pressed down onto it.
Settings
A typical diameter, 0.4mm nozzle was used to make this print. I also did not use 100% infill. I opted for a nylon filament, Taulman Bridge, as I thought it would handle repeated use/friction better than PETG.
Rules
- Please abide by the license and do not print these for commercial use.
- Please do not sell these for profit.
- Please leave a tip if you find it useful.
- Please reach out to me if you'd like me to print one for you.