Squirt V2 85mm Ducts!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decided that I wasn't getting enough performance out of my Squirt V2 and a bad crash broke the duct holder off of…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I decided that I wasn't getting enough performance out of my Squirt V2 and a bad crash broke the duct holder off of the frame. This was when I figured 'hey, lets go for it!'
So here it is!! the 85mm ducts for the Squirt V2... some points: this will not fit to the standard frame, the 'SquirtLegExtn' files will need to be printed in ABS and the existing duct holders cut off and filed round, new propellers will have to be cut at 84mm, I am not to be held accountable if you cut your frame up wrong!
Files:
SquirtFrameV3 is the carbon frame with the correct length duct supports if you can machine carbon fibre
SquirtFrameDuct is the original 75mm duct but I remodelled it because the one provided by shendrones seems to be really low resolution.... these have much cleaner radii
I've also included some Gopro mounts for 15,17.5 and 20 degrees for the faster speeds you'll be hitting with the extra thrust!!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
30%
Filament:
SainSmart TPU 95A
Notes:
Ducts and GoPro Mounts in TPU, 220C, Glass bed at 20C. Supports over 65 degrees, Raft of 10mm for stability in printing. 1.2mm wall thickness.
Leg Extenders in ABS (PLA will go soft if your motors heat up in flight like mine do)
Category: R/C Vehicles