1 / 4
Finger spinner V2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Finger spinner (print-in-place)
- Rating
- 4.955 / 5
- Likes
- 266
- Downloads
- 881
- Makes
- 30
- Views
- 3,032
- Reviews
- 22
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial
If you want to support my work, buy me a coffee
V2 is out!
The following internal diameters are currently available:
20 - 22 - 25mm
if you want other variations ask in the comments
Print settings:
- Nozzle: 0.4 mm
- Loop: 4
- LH: 0.2
- LW: 0.4
- Solid layers: 5
- Infill 15%
I tested printing up to 200 mm/s - acc 10k
it is important to have a well-calibrated printer and not to have seams that are too thick
V2 Changelog:
- less space between the outer and inner ring
- infinite possibilities of available inner diameters
- possibility of having a thicker or thinner ring (z height)
if you have any requests write them in the comments