Hextech Chest - League Of Legends
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.34 – €1.63 net (excluding VAT)
For file: joinedSidePanels_0.15mm_PETG_MK3S_1h29m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.48 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.48 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hextech chest (cca 10x10x10cm) with functional hinges and removable interchangable walls.
- Rating
- 0 / 5
- Likes
- 60
- Downloads
- 267
- Makes
- 0
- Views
- 2,709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my recreation of the League Of Legends hextech chest (made it as birthday gift fot a friend, who loves lol), I've eyeballed it from one image, most of the parts are printed with color change after 1mm, i've used Prusament anthracite grey PETG and Prusament clear PETG. Finished the model with gold acrylic colour (Citadel colour, base, Retributor Armour - my advice, buy the smallest brush you can find, mine was too big so I overpainted a few times) and some blue LEDs.
I've tried making my own little hinges, but the were really bad, so I used these that work great (https://www.printables.com/cs/model/202-hinge)
You can print custom walls if you make them 10x10 with 3mm vertical stripe on both sides for sliding inside the base. For example using lithophane champions looks nice (Zoe is great, Orianna looks really bad - might need some tweaking).
Note that this is my first big modeling and printing make, there might be some small errors.
I recommend building a pillar in middle of base and rotate the led strip from bottom to top around it, you will get better led coverage, plus it won't obstruct the hinge. Also I'd make the base 4 pillars a little stronger.