Spill Resistant Allergy Bottle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A parametric spill resistant bottle holder. Sized for 20-21mm diameter bottles with the label still on the bottle.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
My girlfriend gets bottles of allergy stuff from her doctor to take for allergy immunotherapy. The bottles are tippy, fiddly, and like to fall over at the wrong time. Each bottle costs ~$150, knocking over a bottle is expensive :(
I designed this bottle holder to help out. The base is nice and wide, making it almost impossible to knock over. The holder has slots in the side so you can see how much is left in the bottle. There's enough room to make it easy to grab and unscrew the top. On the bottom is a nice little hole that you can use to push the bottle out of the holder.
The model holds 20-21mm diameter bottles with their label attached.
Print Notes
This should be printed in the orientation show, in the model, i.e., bottom down. I turn on supports and set the style to “Snug." This makes the slots look nice and square, but it's certainly an optional step.
Printing with a .4mm nozzle at .2mm layer height yields really nice results. Takes ~1 hour 42 minutes to print.
Model Notes
I've included the Fusion360 model file. There are parameters that will adjust the diameter of the bottle hole, and the height, feel free to adjust these to fit your needs :)