Strong CLIP attack
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.18 – €1.44 net (excluding VAT)
For file: PETG_Strong CLIP_0.3mm_1h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.31 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 1.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Usefull for bags or places where you need strong grab.
- Rating
- 4.871 / 5
- Likes
- 1,601
- Downloads
- 11,907
- Makes
- 133
- Views
- 26,845
- Reviews
- 116
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print with PETG, without support Z=0,3 20%infill
! Print Spring with 100% infill !
Simple to build together, but only one way is easy way. :)
How to put together:
In this step, I suggest placing a piece of cardboard between the jaws and pushing the upper part until the jaws are parallel.
Then push the spring until it clicks into place.
W