Model Paint Storage Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Vallejo model paint kit I bought did not come with a decent storage solution so I decided to try to make one. This…
- Rating
- 5 / 5
- Likes
- 34
- Downloads
- 182
- Makes
- 4
- Views
- 739
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Vallejo model paint kit I bought did not come with a decent storage solution so I decided to try to make one. This was my very first 3D model from scratch and in the end I came up with 3 variations of the design I imagined.
The first variation I made was the 2 Tier Staggered design. I started to have doubts if this was the design I really wanted to print and so I went back and came up with the 2 Tier Straight design instead. This is the model I ended up printing and currently using but I felt I could maybe do better. In the end I came up with one more variation, the 4 Tier Straight.
Again, I only ended up printing the 2 Tier Straight design but I thought I would include the other variations in case someone was interested.
*UPDATE 02-03-2017*
I felt like tweaking this once again. This time I rounded off the sharp corners. I think it looks a little better...
*UPDATE 08/11/2019*
Now with no "PAINT" text. Enjoy!
Print Settings
Printer:
Monoprice Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Notes:
Using Hatchbox PLA at 195 degrees with a 60 degree bed.
Originally designed in my head then haphazardly transcribed onto a crumpled piece of scrap paper. Later using a caliper to fill in some rational measurements and finally attempting to reproduce my vision in SketchUp
Category: Tool Holders & Boxes