XH-M214 automatic watering module Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist case for the xh-m214 module
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 56
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a minimalist case for the XH-M214 watering module that is easy to print.
The holes for the buttons was intentionally left small, so it can't be pushed accidentally. You can use a toothpick, or something with similar dimensions when you are changing the settings.
You will need four M2x6 or M2x10 screws to hold the top and bottom pieces together. If you don't have screws, or you don't want to disassemble the case later then you can also use some hot glue to hold it together.
Designed with Fusion360.
Printed with Creality Ender 5 pro.
I used PETG; nozzle: 0.4 mm; layer height: 0.2 mm; infill: 20%; wall line count: 4; supports are not needed.