1 / 1
MK3s extruder cooler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cooler will reduce the temperature of the extruder by about 8° Celsius.
- Rating
- 5 / 5
- Likes
- 42
- Downloads
- 164
- Makes
- 3
- Views
- 1,843
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This cooler will reduce the temperature of the extruder by about 8° Celsius. Especially suitable when the printer is troubled by "Heat Creep".
It mainly helps when the printer is inside an enclosure.
Suitable for example "PLA Prusa Galaxy Black" or "PLA Sunlu WOOD - LowTemp". In general, it is suitable for all filaments that do not benefit from higher temperatures inside the enclosure.
Don't forget to use thermal paste between the stepper motor and the heatsink. I recommend "arctic mx-4" paste
Used cooler - "nema17 cooler - 40x40x11mm"