1 / 1
Panel Foam Cable Port
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A port for running cables through a sealed panel with foam
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For a printer enclosure I wanted to run a variety of cables through a sealed 6mm thick panel. The solution I arrived at was sandwich 3/4" x 1/4" high density weather stripping tape between two bezels. Cutting undersized holes in the foam for the cables. It worked pretty well in practice with a few sizes of cable.
Bezel attached with two screws, M3 x 12mm and two M3 nuts. Two jigs are included. One for cutting the foam to the right size. The other to cut to drill the panel and cut the opening.