1 / 4
GRR-RIP Block tool holder for 12mm (1/2") French cleat — image 1
1 / 4

GRR-RIP Block tool holder for 12mm (1/2") French cleat

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Tool holder for the GRR-RIP Block from Microjig. The tool holder is made for a 12mm (1/2") French cleat.

Rating
0 / 5
Likes
36
Downloads
102
Makes
0
Views
859
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

A simple tool holder for the Microjig GRR-RIP Block tool. The holder has a build-in fresh cleat for 12mm (½") cleats. If you need for 18mm (¾") cleat or no cleat at all, please look under related models. The model is 18cm long, so it can be printed on the Prusa Mini. Best way to print it is vertical, as it uses the least amount of support, but you can also print it horizontally which takes 1 ½ hour longer due to the extra support needed.
When printed vertically chose standard support settings and support everywhere. The support can easily be removed with your fingers. For strength choose 3 perimeters and 15% infill. I chose Gyroid as infill with all other settings for infill and support as standard, which worked great. I printed with a 0.6 nozzle head at 0.40 draft mode for maximum speed with no problems. Print material used was PLA.

Tags