Silhouette Cameo Tool Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a box to hold the various tools used with my Silhouette Cameo 4 machine.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 73
- Makes
- 0
- Views
- 1,543
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Just a box to hold the various tools used with my Silhouette Cameo 4 machine. It has space for 8 cutting tools, adapters and a full set of 24 sketch pens.
The assembled box has a hinged lid with a light catch on the front and slots for a strap if the box is to be carried.
I recommended to print it in PETG, with around 3 perimeters and 4 top/bottom layers, which will provide sufficient strength for the box and catch. I didn't need any support when I printed these parts on my machines.
For the hinge, I used a 130mm length of 5mm diameter brass rod. To make printing easy the hinges need to be attached to the lid - I used PET 3D Gloop, but superglue or epoxy would also work. When you glue the hinges, I suggest inserting the rod into the box hinge and then dry mounting the hinges so that you can align them.