Remix of Leifheit Click System Holder by DirkHoefle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Leifheit Click System Holder by DirkHoefle optimized for using PLA as print material.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 115
- Makes
- 1
- Views
- 815
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to store some of my Leifheit cleaning equipment on a wall or under a cupboard. So i searched for printable mounts. I found the mount provided by DirkHoefle and printed it. Unfortunately it broke for me on second use because PLA is very brittle and the spring was design very short. So I came up with this remix to improve the design for my use.
In the end I came up with a design for a support free spring design which works with PLA. It took me a lot of revisions to optimize it an allow a smooth insertions in the equipment. This remix is usable in two ways. You can use the parts to fix the original parts or directly print the remixed part.
I think in the future I will make completely new designs for the Leifheit system to make it more easy to expand for every one.
I would be happy to see some of your makes posted :)
Modifications on the remix:
- Separated tongue from tube
- Reduced the tube 3mm in height (it got stuck on my equipment)
- Complete redesign of the tongue
- Designed the tongue as a separated insert from the top (mainly to be able to fix my broken part)
- Added a spline based spring mechanism which works with PLA (for my material)
- Made the tongue a little bit smaller and rounded it to fit in the equipment better
- Moved tongue 1,5mm out of the cylinder to have it seated better in the equipment hole
- Added an angled slide to allow smooth insert in to the equipment
Info before printing:
- I recommend to print the “leifheit_tube_remix” first end measure the size of the top hole and compare it to the measurements I have provided (see image).
- In case your tube hole size varies I suggest to scale the model a little bit in the slicer.
- Alternatively you can thicken the diameter of the “fix_plug” with tape or secure it with some super glue. But it is designed as a press fit.
Print instructions:
- Minimal support needed (see image)
- Part is mostly optimized for 0,3mm layers
- Use 5+ walls to ensure the spring is solid material
Assembly:
- Solution 1: To fix the original part:
- Saw of 3mm of the original tube (gives a better fit for me)
- Chamfer the edges
- Press in the “fix_plug”
- Done.
- Solution 2: To fix the original part:
- Press in the “fix_plug”
- Press in the “distance_piece_3mm”
- Done.
- Solution 3: Print the remix:
- Print the “leifheit_tube_remix”
- Press in the “fix_plug”
- Done.
Optimization:
- I suggest to sand/file of the edges from the tongue (see images).
- This will remove the ripples from the layers and allow a smooth insertion in the equipment parts.
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.