Control button - medium
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.22 – €0.27 net (excluding VAT)
For file: knofl_2_0.2mm_PLA_MINI_20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 20.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple but practical control button cover for 3d printer or other devices with similar control.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 1
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
[ENG]
While it is nice to have a differently decorated printer, the control of the printer should be primarily about practicality and comfort, and this cover is designed with that in mind. Its attachment to the 6mm axle is easy with just a flick, and its slightly rugged surface with no sharp edges ensures confidence in operation. Also, the subtle depression at its end and slightly conical shape will add to the stability when pressing the button, either by squeezing with one finger or turning. This medium width version is a compromise between the fine responsive control of the wide button and the quick response of the narrow button.
[CZ]
Je sice hezké mít různě ozdobenou tiskárnu, avšak zrovna u jejího ovládání by mělo jít v první řadě o praktičnost a pohodlí s ohledem na to je vytvořena tato krytka. Její nasazení na 6mm osičku je jednoduché pouhým zamáčknutím a její lehce členitý povrch bez ostrých hran zajistí jistotu při ovládání. Taktéž jemná prohlubeň na jejím konci a mírně kónický tvar dopomůže ke stabilitě při stisku tlačítka ať již zmáčknutím jedním prstem, tak při otáčení. Tato středně široká verze je kompromisem mezi jemným citlivým ovládáním se širokým tlačítkem a rychlou reakcí úzkého tlačítka.