Burette Stopcock Nut - Glasküken-Sicherung für Bürette
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement locking nut for the glass stopcock of a volumetric burette.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution
I received a used burette which was missing the fastener/nut for holding the glass stopcock securely in place. But I fortunately the O-ring was included.
Assuming the stopcock is greased and inserted in the burette, the way it works is that the O-ring is put into the recess of the nut (protruding slightly). The washer goes onto the other end of the stopcock first, followed by the nut (O-ring first). The O-ring does not have the purpose of sealing anything, but it gets squished between the washer and the nut and gives the whole assembly the tension it needs to not unscrew itself as the burette is used and the stopcock is turned.
There are two printable variants:
If you don't have or can't get/print a flexible O-ring (remember, it does not have to seal, just be squishable), simply print the file with "alternative" in the name (PLA or PETG both work). If you have TPU, it is probably easiest to print the "alternative" nut in TPU and the washer file in PLA or PETG. That way, you get the needed squish/tension from the nut itself.
If you have an O-ring (mine had an outer diameter of just under 16mm), print the "Nut" and "Washer" files. Depending on your bed adhesion, the washer might need a brim. The washer should be printed in a slippery material (it will move against the Burette body when turning the stopcock). PLA or PETG for everything is fine.
If the fit is too tight or too loose for your particular burette, it might be worth a try to scale the whole model along the XY plane. If you’re familiar with FreeCAD, you can modify the included file (see the Spreadsheet object for parameters).
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
16mm
Infill:
None, use high number of perimeters
Filament: does not matter any does not matter
Notes:
Brim recommended.
How I Designed This ===================
Designed in FreeCAD. If you want to modify the design, look whether simply updating the values in the spreadsheet will do the trick (this design is ~90% parametric). Please simply ignore the "Knurling" body. It's a quick and dirty hack and won't update with the parameters. The knurling is not essential for functioning.
Category: Other