Rotor Riot CL1 GoPro Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
GoPro mount for the CL1 frame.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This works with the Rotor Riot CL1 frame, and would likely work with others. You will need a M5 nut, or find one from a broken GoPro mount. It works in the front or back, 32 or 33mm spacing. I used 8mm M3 screws to replace the 5mm ones holding the top plate on to mount this to the drone frame.
Printing: I printed two, one in PLA, and one in TPU, and I would recommend TPU to help reduce vibration in the video. No supports or rafts are necessary. I would recommend 3+ perimeters, top and bottom layers for durability. Infill should not make too much of a difference, but I used 30%.
I attached the Fusion 360 .f3d file if you would like to modify.