Xbox controller Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed as the original had quite a chunky profile. The arms have been given an extra 2mm as the original ones were a…
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 1
- Views
- 650
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed as the original had quite a chunky profile.
The arms have been given an extra 2mm as the original ones were a bit flimsy.
Works with the headset adaptor and fits the edge of an Ikea lack table perfectly (although it can go anywhere).
Update:
I've added the inserts for the xbox logo. Just print them off and push fit them in place. I needed to sand a thin bit off each edge but then just used the butt of a screwdriver to hammer them in place. I just wish I had some green filament :)
UPDATE:
I have added 2 more screw holes due to the legs pulling on the top of the frame which pulls it away from the wall/table. Also reversed one of the legs due to the same reason.
Category: Video Games