Zee Fan Duct for Ender 3 v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I recently bought an Ender 3 v2 printer as a second printer and did not plan to do any medications. Unfortunately, the…
- Rating
- 5 / 5
- Likes
- 60
- Downloads
- 238
- Makes
- 1
- Views
- 2,100
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I recently bought an Ender 3 v2 printer as a second printer and did not plan to do any medications. Unfortunately, the cooling performance when printing PLA was less than optimal. This might be something specific to my printer. I decided to design a mount with two 5015 blower fans.
The focus of the design was to ensure as much cooling as possible while keeping the weight down (considering 2 x 5015 fans were used).
Parts
4 x M3x15 Self tap
4 x M3x20 Self tap
2 x M4x20 Bolts and Nuts (Optional)
1 x Small Cable Tie
To use a 40x40x10 fan print the Cone_40x10.stl file. To use a 40x40x20 fan print the Prod_Cone_40x20.stl file. The Cone_40x40x20.stl design has not been tested, bit should work.
Due to the size used by the dual fans the probe of the BLTouch is located at X:-47, Y:-11 from the nozzle.
Thanks to @Gil80 for the assistance with testing the design!
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
15%
Filament:
eSun PLA
Notes:
I experienced no melting problems from the heat of the nozzle even when using PLA, but materials like ABS or PETG with a higher melting temperature can also be used.
Category: 3D Printer Parts