M3 T Nut Helpers for 2020 V slot Extrusion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Series of simple nut helpers to retain a M3 T Slot Nut in the locked position in a 2020 extrusion
- Rating
- 5 / 5
- Likes
- 225
- Downloads
- 709
- Makes
- 3
- Views
- 4,822
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a series of simple nut helpers to retain an inexpensive M3 T-Slot Nut in the locked position within the extrusion. I designed this primarily for mounting Linear Rails to a 2020 V slot extrusion. Therefore all the variants are set to 25mm centres to allow for this.
Note: The helpers are required to be inserted prior to assembly of the frame. They will not work if a clear end to the extrusion is not available for insertion.
I have included a step file for remixing for personal needs or variants.
I have printed in PETG to provide a little more flexing to the nut retention @ 100% infill.
This really does not need to be a tight fit as long has the T Nuts are captive to the part.
No supports are required.
Very fast little printed parts that are worth making for stock when using up the tail end of a roll of filament.