M3 T Nut Helpers for 2020 V slot Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Series of simple nut helpers to retain a M3 T Slot Nut in the locked position in a 2020 extrusion
- Ocena
- 5 / 5
- Polubienia
- 224
- Pobrania
- 703
- Wydruki
- 3
- Wyświetlenia
- 4771
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a series of simple nut helpers to retain an inexpensive M3 T-Slot Nut in the locked position within the extrusion. I designed this primarily for mounting Linear Rails to a 2020 V slot extrusion. Therefore all the variants are set to 25mm centres to allow for this.
Note: The helpers are required to be inserted prior to assembly of the frame. They will not work if a clear end to the extrusion is not available for insertion.
I have included a step file for remixing for personal needs or variants.
I have printed in PETG to provide a little more flexing to the nut retention @ 100% infill.
This really does not need to be a tight fit as long has the T Nuts are captive to the part.
No supports are required.
Very fast little printed parts that are worth making for stock when using up the tail end of a roll of filament.