1 / 6
Raspberry Pi Camera Mount for Printer Enclosures
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
A simple, easy Raspberry Pi Camera mount to attach to the top side of a 3D printer enclosure. This print utilizes 4xM3 screws which can face the printer at a 40° angle. The camera itself simply slides into the mount, and no additional fasteners are needed!
The gcode for Prusament PETG is included.
Print instructions
My setup for a successful print:
Printer Brand: Prusa
Printer: i3 MK3s
Brim: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Prusament PETG (Jet Black)
Notes:
- I had to rotate the part on the print surface in order to allow it to print without supports (see images)
- You'll need to put the camera inside of the mount before you mount it onto the enclosure
- You must also have two to four M3 screws