Kyria High Profile 25 and 45 degree tent with(45* version only) and without wrist rest holders
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Many people asked so I added a 25 degree version. These are both for the high profile Kyria case. I would use supports…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Many people asked so I added a 25 degree version. These are both for the high profile Kyria case. I would use supports when printing the 25 degree version.
I prefer a steep tent for Keyboards. This is 45 degrees. There are 2 sets of stl's. One with holders for the wrist rest and one without since I know not everyone will use them. I printed with 20% infill for some added weight. It took 19 hours per side with these settings.
These are the wrist rests I used: https://www.amazon.com/gp/product/B07F7Y1LRL/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.20
Infill:
20
Post-Printing
I added grip tape to the bottom so it wouldn't slip on my XXL deskmat.

Category: Electronics